Introducing
Lightningwire
A.K.A. EL Wire
The only electric glowing phosphorous wire around!
| Lightningwire
is made of a lightweight flexible vinyl
tubing with a thin phosphorous coated core wire which illuminates when 115 v A.C.
is applied FROM THE INVERTER (order
separately). Wire will never heat up and provides hours of creative fun for
anyone. Wire can be shaped and bent around your finger or braided together with
other colors. |
STOP
PLEASE READ & UNDERSTAND THIS HOW TO ORDER
First: Pick your Size of Wire: 1mm, 2mm, or 5mm
NEXT: Pick the Color
NEXT: Pick the Length 3 FT MINIMUM !!!
NEXT: Select the Invert to light the Wire Based on its length
Next: Select Battery Power or Wall Power
Can ya Do That ??
Colors come in:
In order of Brightness
Lime Green, Aqua,
Coral,
Yellow, Pink, Green, Blue, Red,
Violet,
and White.
Wire can be powered by our hand held drivers or off a wall adapter.
Lightning Wire
Wire comes in 2.2mm & 5mm size, if you select snaps, then we solder a 2 Pin Molex snap to the wire and the inerter allowing you to connect and disconnect the wire, If you select Hard wire then we will solder it directly to inverter. If you select NO Snaps then you will get raw wire, you must directly solder it to an inverter or add a connector! You can solder multiple colors together if you wish, you must order RAW wire if you do this!
NOTE: The Green Wire Looks a Bit Bluegreen, if you wish Green select Lime Green.
PRICES
1Mil Wire
8 Color for = 1mm 1/32"
R,B,A,G,Y,L,W,Coral
$1.65 ft. any color!
2.2Mil Wire
9 Color for = 1mm or 2.2mm wire 3/32"
R,B,A,G,Y,L,W,C,V
$1.75 ft. any color!
5Mil Wire
7 Colors for = 5mm wire 13/64"
R,B,A,G,Y,L,W,V,C
$1.95 ft.
NOTE: ALL INVERTER will make a slight whining noise when on!
If unsure of what color you would like, try the 6-Pack Sampler
6-Pack Sampler
|
The 6-pack Sampler has 6 different colors, 8" long and a "AA" inverter pack. This sampler pack is perfect for those not knowing what color they would like, get it, sample the colors, and order what you like best. Unit has Constant & Blink mode, take 2 "AA" Batteries! 6-Pack $14.95 out of stock |
THE INVERTERS
| You must order an inverter to power the wire, inverter type is based on length of wire use!, You can cut and mix colors, but don't exceed the total length for that inverter! Example: 6 ft of wire, purchase an "AA" Inverter. 18 ft of wire, order a PD20, 30 ft of wire, order a PD50. Get it ? |
PD7 Mini Driver
Smaller unit for L-wire, 9 vdc Battery powers 3-7 ft. Size is 5/8" w X 1-1/8"l X 1/4"h
$5.50 ea.
AA Hand Driver
|
This
unit uses two "AA"
batteries and can drive up to 15' of wire.
Has blink Modes: Fast Blink, Slow Blink, or Constant on.
It can be left on for up to 14 hrs before battery goes dead. Drives up to 15' of wire $8.50
ea Wire
Not Included!
|
Power Driver 20
|
PD20-9v Drives up to 20 feet with wall inverter or 10-15 with 9 v battery .
Size 1" x 1.5” Item # PD20-9 $8.50 Add Wall Plug for $3.00 more
|
Power Driver 20-12
|
PD20-12v Drives up to 20 feet with wall or battery.
Size 1” x 1” Item # PD20-12 $6.50 Add Wall Plug for $3.00 more
|
Power Driver 50
|
PD50 Drives up to 50 feet with wall inverter or 20 with 9 v battery .
Size 1” x 1” Item # PD50 $14.95 Add Wall Plug for $3.00 more
|
Power Driver 100
|
PD100 Drives up to 50-100 feet with wall inverter 12 v battery or Wall
inverter . Size 2” x 2” Item # PD100 $35.50 Includes Wall Plug!!
|
L-Wire Grab Bag
|
Our El Wire Grab Bag is just small cut sections of all sizes of the EL wire. No connectors you cut and solder as you need it. Bag comes with at least $10.00 worth of wire.
Item # El Grab Bag $5.50
|
LW Sound to Light
|
This NEW unit will light the EL wire up to 30 ft. Great for in the car, flashes to the rhythm of the music, or costumes!. 3 functions: on, music controlled (adjustable sensitivity), & Off modes power supply: 9-12Vdc Power recommended. Single Channel ONLY
Drives up to 30' of wire $12.50
ea Wire
Not Included!
|
Sound to Light Driver # 2
|
This NEW S2L unit will light up to 3 Channels of EL wire up to 20 ft. Great for in the car, costumes, Models and more. Flashes to the rhythm of the music in 3 different frequency ranges High, Mid, & Low. 3 functions: on, music controlled (adjustable sensitivity), Rainbow, & Single color modes. Power supply:12-Vdc Power recommended. Comes with 3 PD20-12 Inverters. You must order wire separately !!
Drives up to 20' of wire $89.95
ea Wire
Not Included!
|
|
6 Volt Battery Pack When you need to light our PD50 or PD100 units for costume use, please order the 6 V Battery Pak, AND ORDER 2 of them. This will give you 12vdc to operate the inverters. We will set up a Wire system for up to 3 Snaps off inverter. >>>> PLEASE CALL THIS ORDER IN <<<< 707-998-3903 |
|
3 Channel With 8 Programs.
3 Channel Sequencer runs on 4 AAA batteries. Rated for 3 lengths
of 2.5 feet long EL wires. It has about 8 programs, each with two speed
settings. Perfect for costumes or displays. Dim: 2 1/8" x 3
1/4" x 3/4", Weight: 2 oz. NOTE: Price does not include soldering of wires to unit, that you do yourself or we can do it for a fee! $14.95 Ea.
or 5 Channel With 8 Programs.
5
Channel Sequencer runs on 4 AAA batteries. Rated for 5 lengths of 2.5
feet long EL wires. It has about 8 programs, each with two speed
settings. Perfect for costumes or displays. Dim: 2 1/8" x 3
1/4" x 3/4", Weight: 2 oz. NOTE: Price does not include soldering of wires to unit, that you do yourself or we can do it for a fee! $15.95
|
Click Here For More Examples & Ideas
More Pages
Fiber Optics LED Lighting El Wire More Lighting & Misc. Items
Copyright © 1998-2008 Fiber Optic Products, Inc.
4-3-08
